45xx Modular Disk Subsystem Manual for G-Series Releases

45xx Modular Disk Subsystem Manual for G-Series Releases—142466
vii
About This Manual
This manual describes the installation and operation of the 45xx modular disk
subsystem, which is connected to a 6760 ServerNet device adapter in a Himalaya
S-series server. This manual includes information about 4560, 4570, 4580, and 4590
disk drives for Himalaya S-series servers on G06.01 and subsequent G-series releases.
Who Should Use This Manual
Users of the 45xx modular disk subsystem perform the following activities:
•
System planning and installation
•
Configuration
•
System management
•
Operation
Supported Releases
This manual describes information for the following.
What’s in This Manual
The manual contains these sections:
•
Section 1, Introduction
This section describes the modular disk subsystem and the components that support
the subsystem.
•
Section 2, Installing and Configuring the 6760 Adapter
This section explains where to get information about installing and configuring the
6760 ServerNet device adapter.
•
Section 3, Checking Hardware Operation
This section describes troubleshooting procedures you can use on the 45xx modular
disk subsystem.
•
Section 4, Installing and Removing CRUs
This section explains how to remove and install customer-replaceable units (CRUs)
in the 45xx modular disk subsystem.
This manual also contains a glossary of technical terms and abbreviations used in this
manual.
Server or System Type Supported Devices Supported Releases
Himalaya S-series servers 4560, 4570, 4580, and 4590 G06.01 or later G-series releases