User's Guide

The 5157/5157 ACL S-Series Subsystems Installation/Users Guide

Installing and Configuring the 5157 Tape Drive

3-6

Figure 3-5 SCSI ID push button switch location

3.5 Connect the Cables

Section 3.5 includes the following topics:

• Examine the 5157 Rear Panel

• Connect the SCSI Signal Cable

• Terminate the SCSI Bus

• Connect the Power Cord

3.5.1 Examine the 5157 Rear Panel

Examine the components on the 5157 rear panel to complete the

physical installation (see Figure 3-6).