User's Guide

5157/5157 ACL S-Series DLT Subsystems Installation Users Guide

Operating the 5157 ACL Tape Drive 6-10

The display’s second line displays possible status conditions of the

library robotics:

• Loader Idle

• Fetch

• Stow

• Diag Active

• Diag Complete

• Taking Inventory

• Elevator Home

• Checking Drive(s)

• Orphaned Cartridge

• Trapped Cartridge

• Scanning Labels.

The third line represents a map of the magazine. A 10-slot magazine

is shown. The number 1 shows the location of slot 1 (the front slot)

in the map. The number 10 shows the location of slot 10 (the rear

slot) in the map. Where a rectangle appears on this line, it indicates

that a cartridge is present in the corresponding slot of the magazine.

An underline means that there is no cartridge present in that slot.

6.5.4 Fault Screen

When a fault is detected, a screen similar to Figure 6-6 appears. At

the same time, either the Drive Fault or the Loader Fault LED is

illuminated.

Fault Code: XXXXFault Code: XXXX

Error DescriptionError Description

ERP line 1ERP line 1

ERP line 2ERP line 2

Figure 6-6 Fault Screen