5190/5194 Modular Tape Subsystem Manual

Using TMDS or the TSM Package
5190/5194 Modular Tape Subsystem Manual—426878-002
5-5
The STATUS Command
The STATUS Command
Information for the STATUS command is retrieved from primary and backup tape
processes. It represents the tape-process view of configuration and may not reflect the
actual physical configuration.
To display status information for the tape drive named $TAPE, enter the following
command:
TMDS displays information similar to the following example.
STATUS DRIVE $TAPE
TAPE> STATUS DRIVE $TAPE
TMDS TAPE DIAGNOSTICS - T9497D31 - (07JUL95)
COPYRIGHT TANDEM COMPUTERS INCORPORATED 1985 - 1994
------------------------------------------------------------------------
| TAPE STATUS COMMAND INPUT INFORMATION 16 SEP 96 16:31:29 |
| |
| DRIVE : $TAPE |
| CPU : ALL |
| DRIVEDATA : DECODED/RAW for 3217/5188 |
------------------------------------------------------------------------
Primary Pin: 31 System Backup Pin: 31
+=======+ Ch 1 +=======================================+ Ch 1 +=======+
| Cpu5 |*******| Controller %0 Type 3216 |*******| Cpu4 |
+=======+ +=======================================+ +=======+
*
U
*
(-P) *
+======================================================+
| $TAPE, $54, Unit 5 |
| Type 5194 - (compression on) |
| |
| Tape odometer read/write hours: 32.25 |
| Total sectors processed: 45,163 |
| ACL installed. |
| Cartridge Map: Slot 1, 2, 3, 4, 5, 6, 7 |
| (I=tape in; O=tape out) O O O O O O O |
| |
| Drive Status: |
| Rewinding , |
| Sense Key = 2 (Not Ready) Logical Unit not ready , |
| Buffered/Streaming , 36 tracks , IDRC installed ,|
| Compressed- Compact , Max ACL slot # 7 , |
| Auto ACL mode , Vendor ID: FUJITSU , |
| Product ID: M2483 M2483B , Product Rev: 0103 , |
| SIC ucode: 03/03/5 A04-A , |
| FMTR ucode: 03/02/5 F46-A |
| |
| |
+======================================================+
TAPE>