5190/5194 Modular Tape Subsystem Manual

Index
5190/5194 Modular Tape Subsystem Manual—426878-002
Index-3
C
Cartridge tape drive 1-2
See also ACL
cartridge entry slot (illustrated) 4-22
cleaning 4-27
configuration
3216 controller 3-13
F-PIC 3-14
MFC 3-12
PMF CRU or IOMF CRU 3-14
S-PIC 3-15
CRU service class 3-1
differentiating between 5190 and 5194
cartridges 1-4
front panel 4-22
loading and unloading mechanism 1-2
loading cartridges in 4-15, 4-24
message panel 4-23
operating with an ACL 4-5/4-21
operating without an ACL 4-22/4-26
operator buttons 4-23
placement within module 3-6
power-up sequence 3-41
rewinding tape 4-19, 4-26
status indicator LEDs 4-8, 4-23
tape position LEDs 4-23
unloading cartridges from 4-18, 4-25
Cartridge tapes 1-3
cleaning cartridge
See Cleaning cartridge
compatibility 1-4
damaged 4-4
description 1-3
dimensions 1-3
environmental requirements 4-2
extended 1-4
file-protect thumbwheel 4-3
handling 4-2
labeled tapes 1-5
leader block
See Leader block
loading 4-15
, 4-24
recording format 1-3
rewinding 4-19, 4-26
scratch tapes 1-5
standard 1-4
storage capacity 1-3
storing 4-3
tape-label formats 1-5
unlabeled tapes 4-42, 4-43
unloading 4-18, 4-25
viewing the contents of 4-40
Cartridges 1-3
See also Cartridge tapes
See also Cleaning cartridge
Check codes 4-29
, 4-30, 4-31
CHK 98 check code 3-51, 3-53
CHK F8 check code 4-28
Checking the device ID 3-41
CHK 98 check code 3-51, 3-53
CHK F8 check code 4-28
CLASS TAPE DEFINE 4-50
CLASS TAPECATALOG DEFINE 4-50
Cleaning a tape drive 4-27
Cleaning cartridge
checking for installation of 4-5
, 4-28
CHK F8 check code when using 4-28
described 1-3, 4-4
installing in ACL 3-44
removing from ACL 6-11
replacing in ACL 6-10
using 4-27
CLEANING message 4-29
Codes on cartridge position indicator 4-10
Command summary, TMDS 5-2
Common operations 4-1
COMP (compression) LED 4-8, 4-23, 4-44