5190/5194 Modular Tape Subsystem Manual

Configuring the Modular Tape Subsystem
5190/5194 Modular Tape Subsystem Manual—426878-002
2-3
Completing the MFC RS-232/SCSI BIC Diagram
J1, J2, J3, and J4 Connectors
The remaining connectors are used for modems, communications lines, terminals, and
printers. For detailed instructions about how to complete these parts of the form, refer
to Configuring Controllers for NonStop Systems.
Figure 2-1. Example of a Completed MFC RS-232/SCSI BIC Diagram
System Name
Section Number
(if applicable)
Cabinet Number
LB/BIC Slot Number
MFC RS-232/SCSI BIC Diagram
Controller Name
Date
Controller No.
MFC0
04 21 95
\BRNCH
1
1A
99
%24
RMI
Logical Device Name:
Physical Location of Device:
Product Number or Description of Device:
Cable Part Number:
Cable ID Tag:
Comments:
$
Unit Number(s):
Logical Device Name:
Physical Location of Device:
Product Number or Description of Device:
Access Method:
Cable Part Number:
Cable ID Tag:
Comments:
$
Unit Number(s):
Logical Device and Subdevice Name:
Physical Location of Device:
Product Number or Description of Device:
Interface: RS-232 or CL
(Circle one)
Cable Part Number:
Cable ID Tag:
Comments:
$
13686
and
.#
Unit Number(s):
Logical Device and Subdevice Name:
Physical Location of Device:
Product Number or Description of Device:
Interface: RS-232 or CL
(Circle one)
Cable Part Number:
Cable ID Tag:
Comments:
$
13686
and
.#
Unit Number(s):
Logical Device Name:
Physical Location of Device:
Product Number or Description of Device:
Cable Part Number:
Cable ID Tag:
Comments:
$
%5
%0,%1
%4,%5
%2,%3
60
NOT
CONFIGURED
TP0
ROOM 2239
5194 Cartridge Tape Drive
$TP0
25 ft. cable
11937
SNFRAN
ROOM 2239
$SNFRAN
X25AM
RS-232 Modem
44988
25 ft. cable
NOT CONFIGURED
NOT CONFIGURED
J4
J2
J3
J1
J5
____/____/____ _____/______
VST035.vsd