5190/5194 Modular Tape Subsystem Manual

Installing the Modular Tape Subsystem
5190/5194 Modular Tape Subsystem Manual—426878-002
3-8
Service Clearance and Dimensions
Table 3-4 shows weights for the components of the modular storage system.
Figure 3-2. Service Clearances for the Modular Storage System
Table 3-4. Modular Storage System Component Weights
Component Weight (lb) Weight (kg)
Module (no drive CRUs) 56 25.5
Module fully loaded (2 drive CRUs with ACLs) 206 93.6
One-high stack (fully loaded) with pedestal 332 150.9
Two-high stack (fully loaded) with pedestal 577 262.3
Three-high stack (fully loaded) with pedestal 822 373.6
5190 or 5194 tape drive CRU 50 22.7
5190 or 5194 tape drive CRU with ACL 75 34.1
ACL magazine (without cartridges) 2.5 1.1
BEB enclosure and board 2 0.9
Pedestal (with riser) 87 39.5
Shelf (riser) 39 17.7
Rear
Front
60-90 cm
(23-35 inches)
90 cm
(35 inches)
VST030.vsd