5190/5194 Modular Tape Subsystem Manual

Contents
5190/5194 Modular Tape Subsystem Manual—426878-002
vi
6. Adding, Removing, and Replacing CRUs
The STATUS Command 5-5
The TSM Package (NonStop Himalaya S-Series Servers) 5-7
6. Adding, Removing, and Replacing CRUs
Procedures That Require a Service Provider 6-1
Replacing a BEB 6-2
Troubleshooting a BEB 6-2
Removing a BEB 6-3
Installing a BEB 6-4
Replacing a 5190 or 5194 Tape Drive CRU 6-5
Removing a Tape Drive CRU 6-5
Installing a Tape Drive CRU 6-8
Returning a Tape Drive CRU to Compaq 6-10
Replacing a Cleaning Cartridge in an ACL 6-10
Removing a Cleaning Cartridge From an ACL 6-11
Replacing a Controller (NonStop Himalaya K-Series Servers) 6-12
Replacing an MFC 6-12
Replacing a 3216 Tape Controller 6-12
Replacing a NonStop Himalaya S-Series Server Adapter 6-15
A. Part Numbers
B. Blank Configuration Forms
Safety and Compliance
Glossary
Index
Figures
Figure 1-1. Tape Drive Module With Two Tape Drive CRUs 1-3
Figure 1-2. A Cartridge Tape 1-4
Figure 1-3. Tape Drive Module With Two Tape Drive CRUs With ACLs 1-7
Figure 1-4. Modular Storage System Stack With Two Tape Drive Modules and Two
ACLs 1-9
Figure 1-5. MFC Logic Board and RS-232/SCSI BIC 1-11
Figure 1-6. 3216 Logic Board and Fiber-Optic BIC 1-12
Figure 1-7. NonStop Himalaya S-Series Processor Enclosures 1-14
Figure 1-8. NonStop Himalaya S-Series I/O Enclosure 1-15
Figure 2-1. Example of a Completed MFC RS-232/SCSI BIC Diagram 2-3