5190/5194 Modular Tape Subsystem Manual

Installing the Modular Tape Subsystem

5190/5194 Modular Tape Subsystem Manual—426878-002

3-17

Unpacking the Modular Storage System

To unpack the modular storage system, use the following procedure. Refer to

Figure 3-10 and to the instructions on the outside of the shipping crate.

1. Cut the straps holding the ramp to the carton, and remove the ramp.

2. While standing at the side of the carton, pull the carton up over the top of the

modules.

3. Remove the styrofoam corner protectors and the antistatic bag covering the

modules.

4. Flip open the twist-lock handles on both sides of the end piece at the base of the

modules, and turn the twist-lock handles counterclockwise to loosen the end piece.

5. Remove the U-bolts from under the end piece and save them for use in the next

step. Separate the end piece from the base of the pallet, and set it aside.

Figure 3-10. Unpacking and Removing the Modular Storage System From the

Shipping Pallet

VST009.vsd