5190/5194 Modular Tape Subsystem Manual

Installing the Modular Tape Subsystem
5190/5194 Modular Tape Subsystem Manual—426878-002
3-27
Connecting and Routing the AC Power Cords
8. Repeat Steps 1 through 7 for each remaining module in the modular tape
subsystem.
Do not install the extrusion guides at this time. Wait until after the cable has been
routed through the extrusion channels.
Figure 3-14. AC Power Cord Routing
To AC
Power
Source
Lower
Cable
Clamp
AC
Power
Cord
AC Power
Receptacle
Extrusion
Channel
AC
Power
Cord
Extrusion
Guides and
Tie Wraps
AC
Power
Switch
VST025.vsd