5190/5194 Read Me First

5190/5194 Read Me First—425003-001

Document History

9. If you did not use COUP to add the subsystem to your system configuration, load

the new operating system image (Himalaya K-series servers only).

10. Bring the subsystem online. See “Bringing the Tape Drives Online After

Installation” in Section 3. To avoid unreliability in the modular tape subsystem, be

sure to download the most current version of controller firmware and tape drive

firmware.

11. Check the device ID for each drive CRU. See “Checking and Setting the

Device ID” in Section 3.

12. Install the cleaning cartridge in drive CRUs that have an automatic cartridge loader

(ACL). See “Installing the Cleaning Cartridge in the ACL” in Section 3 of the

5190/5194 Modular Tape Subsystem Manual.

13. Test the tape drives as described in Section 3 of the 5190/5194 Modular Tape

Subsystem Manual.

14. Review the training CD-ROM shipped with the subsystem for details on how to

operate and care for 519x drives.

Document History

reserved. No part of this document may be reproduced in any form, including

photocopying or translation to another language, without the prior written consent of

Compaq Computer Corporation.

Part Number Product Version Published

425003-001 N.A. April 2000

100804 N.A. September 1993

104896 N.A. December 1993

106552 N.A. June 1994

111215 N.A. May 1995

129450 N.A. December 1996

425003 N.A. May 2000