5243-2SE Tape Drive Installation and User's Guide

Installing and Configuring the Tape Drive for the
NonStop S-Series Server
5243-2SE Tape Drive Installation and User’s Guide—542757-003
2-3
Installation
d. Place a terminator on the bottom left SCSI port of the tape drive. See
Figure 2-2 and Figure 2-3.
e. Connect the DC power cord to the top power connector. For the location, see
Figure 2-2
on page 2-2. There are independent DC power ports for each of the
two tape drives.
Figure 2-3. View of Installed SCSI Cable and Terminator
SCSI Cable Terminator