5257/5257 ACL Installation and User's Guide for NonStop S-Series Tape Enclosures

Unpacking and Installing the Tape Enclosures
5257/5257ACL Installation and User's Guide for NonStop Himalaya S-Series Tape Enclosures—522344-001
2-14
Installing the 5257/5257ACL Tape Drives
The rear cover is shipped with four push-button rivets. Figure 2-11 shows a picture of
the push-button rivets.
Use the four rivets and four screws to install the rear cover. Line up the holes on the
cover with the holes on the enclosure. Place a rivet in each hole and push in the screw.
Installing the 5257/5257ACL Tape Drives
Because shipped tape enclosure already contains the 5257/5257ACL tape drives, only
minimal installation is required unless you need to install spare drives into the tape
enclosure.
Figure 2-11. Push-Button Rivets