5257/5257 ACL Installation and User's Guide for NonStop S-Series Tape Enclosures

Installing and Configuring the 5257ACL Tape Drive
5257/5257ACL Installation and User's Guide for NonStop Himalaya S-Series Tape Enclosures—522344-001
5-5
Setting Up Reserved Slots
6. With the next to line 3, press Enter. The moves to line 4, the appears at the
end of line 1, and the appears at the end of line 4. On line 4, scroll to display more
options. Scroll so that line 5 is displayed, then press Enter to save the new selection.
An * appears at the left of line 5 to indicate that it is the current selection.
7. Press Escape repeatedly until the submenu in Figure 5-4
reappears.
8. Repeat steps 1 through 7 for each configuration option that needs to be change.
Setting Up Reserved Slots
One of the reserved slots can be used for a cleaning cartridge to use the Autoclean
function; however, this function can be used only while operating in Random Library
Mode in conjunction with NonStop Himalaya software, such as TSI's Auto Cartridge
Loader Media Manager (ACLMM).
1. Navigate from the Default screen through the Main menu to the Configure submenu
as shown in Figure 5-2
through Figure 5-4.
2. Scroll down the Configure submenu to “Set Reserved Slots” and select. The screen
shown in Figure 5-7
appears.
3. With the
next to line 1, press Enter. The moves to line 2, an appears at the
end of line 4, and an appears at the end of line 1. On line 2, scroll to specify the
number of slots ot be reserved. Scroll to the desired number, and press Enter.
4. Press Escape repeatedly to return to the Default Screen.
Figure 5-6. SCSI Submenu Scrolled
Figure 5-7. Set Reserved Slots Submenu