5257/5257 ACL Installation and User's Guide for NonStop S-Series Tape Enclosures

Operating the 5257ACL Tape Enclosure
5257/5257ACL Installation and User's Guide for NonStop Himalaya S-Series Tape Enclosures—522344-001
6-13
Map Information Screen
6 Operating the 5257ACL Tape Enclosure
The characters XXXX are the drive model number. This screen is scrollable and lists the
Drive Status categories.
•
Tape Motion
•
Product Type
•
Tape Format
•
Compression
•
SCSI Bus ID
•
Drive Revision
•
Controller Revision
•
Cartridge Present
•
Hardware Error
•
Cleaning Needed
•
Write Protected
•
Operate Handle
•
Drive Serial No.
Map Information Screen
When Map Info is selected, a screen similar to Figure 6-12 appears. The location of the
element being reported appears on line 1 in place of “Location”.
Lines 1, 2, 3, and 4 of this screen are scrollable in unison. For each scroll position, line 1
displays one of these locations:
•
DLT1
•
Slot 1 thru Slot 10
If the NonStop Himalaya software license permits fewer slots than the magazine
contains and if reserved slots have been designated in accordance with that license, or to
use the Autoclean mode, a lesser number of slots are displayed. The procedure for
designating reserved slots is described in Setting Up Reserved Slots
on page 5-5.
Figure 6-12. Map Info Submenu