5257/5257 ACL Installation and User's Guide for NonStop S-Series Tape Enclosures

Configuring the 5257/5257ACL Tape Drive for the
NonStop Himalaya S-Series Server
5257/5257ACL Installation and User's Guide for NonStop Himalaya S-Series Tape Enclosures—522344-001
7-4
Completing the PMF CRU Configuration Form
(PMF/IOMF)
To configure the modular tape enclsoure to connect a tape drive to a processor
multifunction (PMF) CRU, you need:
•
The group, module, and slot hierarchy
•
To identify FRUs
•
To completing the PMF CRU or IOMF 2 CRU Configuration Form
•
To configure the modular tape enclosure online by using SCF
Table 7-1
shows a NonStop Himalaya S-series processor with both PMF CRU's
installed.
Completing the PMF CRU Configuration Form
(PMF/IOMF)
To connect a tape drive FRU to a PMF CRU, document the configuration of the PMF
CRU using a PMF CRU Configuration Form. This form documents configurable entities
associated with the connectors on a PMF CRU. It also provides information about the
tape drive to be connected to the PMF CRU.
Figure 7-1. Both PMF CRU’s Installed
Note. The SCSI passthrough terminator is preinstalled on the differential SCSI port.