32 Line Matrix Printer Code V Programmer's Reference Manual

Chapter 2 Command Codes

Comments Line drawing is positioned by the parameters or commands of an

alphanumerics command sequence (such as horizontal tabs, the

justification parameter, etc.). Consequently, an alphanumerics

command must precede a line drawing command.

Using appropriate values for the horizontal and vertical line length

parameters constructs a variety of vertical and horizontal lines in

varying line thicknesses. The horizontal or vertical orientation of

the line is determined by the longest length parameter.

Example The following commands illustrate solid lines. As shown in the

examples, changing the horizontal and vertical line length

parameter values constructs a variety of vertical and horizontal

lines in varying line thicknesses. With horizontal lines, the

horizontal length parameter actually specifies line length and the

vertical length parameter determines line thickness.

Similarly with vertical lines, the vertical length parameter specifies

line length and the horizontal length parameter determines line

thickness.

^PY^-^F^-

^M^LS0425,0010^-

^O^-^PN^-

^PY^-^F^-

^M^LS0100,0100^-

^O^-^PN^-

^PY^-^F^-

^M^LS0001,0150^-

^O^-^PN^-