5525B/31/32 Line Matrix Printer Code V Programmer's Reference Manual

Logo Generation (Version II)
101
Logo Generation (Version II)
Purpose Provides eight pre-designed logos and symbols in different sizes
and rotations totaling 14 options. Logo Generation is used in
conjunction with the Pixel Expansion command described on
page 103.
Mode Graphics with an Extended Graphics Command selected
Format (cc) ILOGO,
value (cc)G
(cc) Represents the Special Function Control Code
(SFCC). Enter the specific SFCC for your Code V
configuration.
ILOGO, The Logo Generation command. Enter ILOGO, (the
comma following the command is required).
value Represents the variable which selects the pre-
defined logo or symbol. Enter a 2-digit value, from
Table 14, representing the symbol or logo desired.
(cc)G The required terminator for the ILOGO command.
Enter the SFCC for your Code V configuration
followed by a G to end the ILOGO command
sequence.
Table 14. Logo Generation Values
Value Description
41 Copyright symbol
42 Copyright symbol at 90 degrees
43 Registered Trademark symbol
44 Registered Trademark symbol at 90 degrees
45 UL symbol, large
46 UL symbol, large, at 90 degrees
47 Trademark symbol
48 Trademark symbol at 90 degrees
49 CSA symbol
4A CSA symbol at 90 degrees
4B UL symbol, medium
4C UL symbol, small
61 TUV Rheinland symbol
62 GS-Mark Symbol