32 Line Matrix Printer Code V Programmer's Reference Manual

128

Chapter 2 Command Codes

Underlined Print

Purpose Selects underlined printing.

Mode Graphics with a Standard Graphics Command selected

Format (cc) @ U (cc)-

(cc) Represents the Special Function Control Code

(SFCC). Enter the specific SFCC for your Code V

configuration.

@ Specifies one of the @ commands. Enter @ to

begin an @ command function.

U Specifies the Underlined Print command. Enter U

and all characters on the line are underlined.

Underlined print is automatically reset upon receipt

of the line terminator.

(cc)- Graphics Mode CR. Enter the SFCC for your Code

V configuration immediately followed by - to end the

command sequence.

Comments Underlined print is a line-by-line print attribute; it is selected once

and all characters in the line are underlined. The U command

must precede any printable data in the line, and it is automatically

reset when a line terminator is received.

Example The following example illustrates underlined print.

^PY^-

Standard Characters in the Graphics Mode^*

^@U^-Underlined characters: ABCDEFGHIJKLMNOPQRSTUVWXYZ^*

^PN^-