32 Line Matrix Printer Code V Programmer's Reference Manual

136

Chapter 3 Bar Code Command Format

data

Represents the data to be bar coded. The

maximum amount of data depends on which bar

code has been selected from Table 18.

(cc)G Terminates the bar code command. Enter the

SFCC for your Code V configuration immediately

followed by any valid command character or G, the

universal sequence terminator.

IBARC, Examples

The following examples illustrate use of the IBARC, command format using

Code 39. In the command sequence, Graphics mode data is

italicized

and bar

code data is boldface. Refer to the “Commands” chapter for a detailed

description of alphanumeric commands.

Example 1. Code 39 horizontal bar code with embedded printable data field:

^PY^-^M05,05,000^

IBARC,C39,E,12345^G^

-^PN^-

Example 2. Code 39 bar code rotated 90° with printable data field printed

below the bar code.

^PY^-^V05,05,000^

IBARC,C39,B,12345^G^

-^PN^-

Example 3. Code 39 bar code rotated 180° with printable data field printed

below the bar code.

^PY^-^U05,05,000^

IBARC,C39,B,12345^G^

-^PN^-

Example 4. Code 39 bar code rotated 270° with embedded printable data

field.