5525B/31/32 Line Matrix Printer Code V Programmer's Reference Manual

170
Chapter 3 Bar Codes
(cc)G Terminates the bar code command. Enter the
SFCC for your Code V configuration immediately
followed by any valid command character or G, the
universal sequence terminator.
EAN 13 Examples
The following command generated the horizontal default ratio EAN 13 bar
code below. In the command sequence, graphics mode data is
italicized , and
bar code data is boldface. Refer to the “Commands” chapter for a detailed
description of alphanumeric commands.
^PY^-^M10,10,000^KF^ BYT123456123456^G^ KF^-^PN^-
^PY^- enabled the graphics command sequence. ^M introduced the standard
alphanumeric command. The character height selected was 1.0 inches and
character width was selected at 1.0 inches. A 0.0 justification value plus 0
additional dots was selected for data placement. ^KF activated Dark Print. ^B
introduced the bar code command. Y selected the standard 10 cpi font to print
the optional readable data field. Letter T selected the EAN 13 bar code type.
123456123456 is the 12-digit bar code data, and ^G terminated the bar code
command sequence. ^KF^- at the end of the bar code sequence turned off
Dark Print, and ^PN^- terminated the graphics mode.
The following command generated the vertical EAN 13 bar code below using
standard 10 cpi font with the standard default ratio and data of
123456123456:
^PY^-^M10,10,000^KF^ CYT123456123456^G^ KF^-^PN^-