32 Line Matrix Printer Code V Programmer's Reference Manual

Chapter 2 Command Codes

Compressed Print

Purpose Selects a compressed print font.

Mode Graphics with a Standard Graphic Command selected

Format (cc) #

(cc)-

data

(cc)*

(cc) #0 (cc)-

(cc) Represents the Special Function Control Code

(SFCC). Enter the specific SFCC for your Code V

configuration.

Specifies the compressed print font to use. For

example, enter #2 for a 12 cpi font as shown in

Table 5.

(cc)- Graphics Mode CR used as a sequence terminator

representing an end to the initial command

sequence. Enter the SFCC for your Code V

configuration immediately followed by - to end the

initial sequence.

data

The data for compressed print. All characters are

printed in the specified compressed print font until

the compressed print command is terminated (0).

(cc)* Graphics Mode LF used as a sequence terminator

representing an end to the data sequence. Enter

the SFCC for your Code V configuration

immediately followed by * to end the data

sequence.

Table 5. Compressed Print Fonts

Selection Code (

)

Compressed Print Font

Characters Per Inch (cpi)

0 Terminate compressed print

1 10 cpi half-dot

2 12 cpi half-dot

3 13.33 cpi half-dot

4 15 cpi half-dot

5 17.65 cpi half-dot

6OCR-A

7OCR-B

8 12 cpi full-dot

9 15 cpi full-dot