32 Line Matrix Printer Code V Programmer's Reference Manual

Font, Selecting Default (Version II)

Purpose Selects a default font.

Mode Standard Graphics or Graphics with an Extended Graphics

Command selected. When this command is executed as an

Extended Graphics command, descender mode automatically

turns on.

Format (cc) IFONT,S,

(cc)G

(cc) Represents the Special Function Control Code

(SFCC). Enter the specific SFCC for your Code V

configuration.

IFONT,S, Specifies the IFONT command. Enter IFONT,S,.

Represents the selected font value. Replace

with

a value ranging from 1 through 4 or 10 through 13,

according to the IFONT values shown in Table 9.

(cc)G The universal terminator. Enter the SFCC for your

Code V configuration immediately followed by G to

terminate the IFONT,S, command.

Comments When this command is used within an Extended Graphics

command, the default font is selected for Extended Graphics

printing and the four orientations of the Alphanumerics command

(page 26) are available. When this command is used in a

Standard Graphics command, the default font is selected for

standard printing only.

Table 9. IFONT Values

Font # Font Description

1 Draft 10 cpi

2 Draft 12 cpi

3 Draft 15 cpi

4 Draft 17.5 cpi

10 OCR-A Size 1 10 cpi

11 OCR-B Size 1 10 cpi

12 Draft 10 cpi

13 Draft 10 cpi