32 Line Matrix Printer Code V Programmer's Reference Manual

Form Feed

= 6 (OCR-A 10 cpi)

^PY^-

^M03,02,000^S6ABCDEFGHIJKLMNOPQRSTUVWXYZ 0123456789^-

^PN^-

= 7 (OCR-B 10 cpi)

^PY^-

^M03,02,000^S7ABCDEFGHIJKLMNOPQRSTUVWXYZ 0123456789^-

^PN^-

= 8 (12 cpi full-dot)

^PY^-

^M03,02,000^S8ABCDEFGHIJKLMNOPQRSTUVWXYZ 0123456789^-

^PN^-

= 9 (15 cpi full-dot)

^PY^-

^M03,02,000^S9ABCDEFGHIJKLMNOPQRSTUVWXYZ 0123456789^-

^PN^-

Form Feed

Purpose Performs a form feed (hex 0C) function to advance the paper to

the next top of form when used to terminate a standard graphics

command.

Mode Graphics with a Standard Graphics Command selected

Format (cc),

(cc) Represents the Special Function Control Code

(SFCC). Enter the specific SFCC for your Code V

configuration.

, The graphics FF mnemonic. Enter ,.

Comments The form feed command functions as a terminator only when

used to terminate a graphics sequence in an extended graphics

command when free format is enabled.

The control panel form feed key will operate differently dependent

on the source of form feed control at the time the key is pressed.

Form feed is controlled by the LP+ and Code V emulation at

different times.