PGL Programmer's Reference Manual

Chapter 2 Command Codes

Quiet

Purpose Places the IGP/PGL in the Quiet mode, where all data passed to

the ASCII emulation is unaffected by IGP/PGL commands except

for the LISTEN, SFON/SFOFF, and IGON/IGOFF.

Mode NORMAL

Format (cc)QUIET

(cc) The Special Function Control Code.

QUIET The Quiet command; enter QUIET. The IGP/PGL

remains in the quiet state until the Listen command

is received.

Comments In the Quiet mode IGP/PGL ignores all commands except

LISTEN, SFON/SFOFF, and IGON/IGOFF. All commands for the

currently selected protocol in the ASCII emulation will be

interpreted.

The IGP/PGL remains quiet until the LISTEN command (page

73) enables standard IGP/PGL operation. The Quiet command is

ignored if the IGP/PGL is in the Execute Form mode.

Recall

Purpose Loads the user pre-stored program setup file, setup.ptx, from

flash memory into the printer. This is done without sending a

system reset.

Mode NORMAL

Format (cc)RECALL

Comments The file setup.ptx is also automatically recalled into the printer

upon a RESET command.