32 Line Matrix Printer LinePrinter Plus Programmer's Reference

Chapter 1 Software Features

Software Features

This section outlines many of the features available with the software

described in this manual.

P-Series

The P-Series emulation software provides the following features:

• Graphics and a selection of print densities. You can enable graphics

mode and specify a density mode (dots per inch).

• Print Attributes. Characters can be bold, double high, double wide, etc.

• Page Formatting. Commands allow you to set line spacing, page length,

and vertical tabbing.

• Font Typefaces. Also referred to as print modes. The five typefaces

include: Near Letter Quality (NLQ) with or without serifs, Data Processing

(DP), High Speed (HS), OCR A, and OCR B.

• Different character sets are available. You can print the character sets in

the different print modes. (OCR A and B character sets must be printed in

OCR A and OCR B print modes.)

Proprinter III XL

The Proprinter

emulation software provides the following features:

• Graphics and print densities. You can specify different graphics modes

which use different dpi’s (dots per inch).

• Print Attributes. Characters can be bold, italic, double high, double wide,

etc.

• Page Formatting. Commands allow you to set line spacing, page length,

and vertical tabbing.

• Font Typefaces. Also referred to as print modes. The five typefaces

include: Near Letter Quality (NLQ) with or without serifs, Data Processing

(DP), High Speed (HS), OCR A, and OCR B.

• Numerous character sets are available. You can print the character sets

in the different print modes. (OCR A and B character sets must be printed

in OCR A and OCR B print modes.)