5525B/31/32 Line Matrix Printer LinePrinter Plus Programmer's Reference

245
ESC (Escape) sequences, 102
exceptions, 100
factory settings, 98
Make 80-9F Hex Control Codes (ESC 7)
control codes, 126
Set and Reset codes, 103
Epson FX-1050 Features, 17
ESC
(Character Pitch 12 cpi)
Proprinter control code, 71
ESC - (Underline)
Proprinter control code, 96
ESC A (Line Spacing n/72 Inch, Storage)
Proprinter control code, 84
ESC B (Tab Set/Clear, Vertical)
Proprinter control code, 95
ESC C (Forms Length Set in Lines)
Proprinter control code, 77
ESC C 0 (Forms Length Set in Inches)
Proprinter control code, 76
ESC D (Tab Set/Clear, Horizontal)
Proprinter control code, 93
ESC E (Emphasized Print)
Proprinter control code, 75
ESC F (Emphasized Print Cancel)
Proprinter control code, 75
ESC G (Bold Printing)
Proprinter control code, 69
ESC H (Bold Printing Cancel)
Proprinter control code, 69
ESC I (Print Mode)
Proprinter control code, 88
ESC J (Line Feed n/216 Inch, One Line Only)
Proprinter control code, 81
ESC K control code
single density bit image graphics, 145
ESC K (Bit Image Mode, Single Density)
Proprinter control code, 65
ESC L control code
double density bit image graphics, 146
ESC L (Bit Image Mode, Double Density, Half
Speed)
Proprinter control code, 66
ESC N (Margin, Bottom)
Proprinter control code, 86
ESC O (Margin Cancel, Bottom)
Proprinter control code, 86
ESC P (Proportional Spacing)
Proprinter control code, 89
ESC Q (Deselect Printer)
Proprinter control code, 73
ESC R (Tabs, Clear All)
Proprinter control code, 95
ESC S (Superscript/Subscript Printing)
Proprinter control code, 92
ESC T (Superscript/Subscript Printing, Cancel)
Proprinter control code, 92
ESC U (Unidirectional Printing)
Proprinter control code, 96
ESC W (Double Wide Print)
Proprinter control code, 73
ESC x (Print Quality)
Proprinter control code, 89
ESC Y control code
double density bit image graphics, 146
ESC Y (Bit Image Mode, Double Density, Normal
Speed)
Proprinter control code, 67
ESC Z control code
quadruple density bit image graphics, 146
ESC Z (Bit Image Mode, Quadruple Density)
Proprinter control code, 68
ESC (Print All Characters)
Proprinter control code, 87
ESC 0 (Line Spacing 1/8 Inch, 8 lpi)
Proprinter control code, 82
ESC 1 (Line Spacing 7/72 Inch, 10.3 lpi)
Proprinter control code, 82
ESC 2 (Line Spacing n/72 Inch, Executes)
Proprinter control code, 83
ESC 3 (Line Spacing n/216 inch)
Proprinter control code, 85
ESC 4 (Set Top-of-Form)
Proprinter control code, 91