5525B/31/32 Line Matrix Printer LinePrinter Plus Programmer's Reference

247
high density plot sample, 149
normal density plot, 151
normal density plot sample, 148
odd dot pattern plan, 152
plot data byte format, 149
Plot mode graphics
P-Series emulation, 148
Proprinter control codes
Backspace (BS), 64
Bell (BEL), 64
Bit Image Mode, Double Density (Half Speed),
ESC L, 66
Bit Image Mode, Double Density, Normal
Speed (ESC Y), 67
Bit Image Mode, Quadruple Density (ESC Z),
68
Bit Image Mode, Single Density (ESC K), 65
Bold Printing Cancel (ESC H), 69
Bold Printing (ESC G), 69
Cancel (CAN), 70
Carriage Return Set (ESC 5), 71
Carriage Return (CR), 70
Character Pitch 12 cpi (ESC
), 71
Character Set Select
Set 1(A) (ESC 7), 71
Set 2(B) (ESC 6), 71
Condensed Print Cancel (DC2, ESC DC2), 72
Condensed Print (SI, ESC SI), 72
Deselect Printer (ESC Q), 73
Double Wide Print (ESC W), 73
Double Wide Print (One Line Only) Cancel
(DC4, ESC DC4), 74
Double Wide Print, One Line Only (SO), 74
Emphasized Print Cancel (ESC F), 75
Emphasized Print (ESC E), 75
Form Feed (FF), 76
Forms Length Set in Inches (ESC C 0), 76
Forms Length Set in Lines (ESC C), 77
grouped by function, 62
Line Feed n/216 Inch, One Line Only (ESC J),
81
Line Feed (LF), 80
Line Spacing n/216 Inch (ESC 3), 85
Line Spacing n/72 Inch, Executes (ESC 2), 83
Line Spacing n/72 Inch, Storage (ESC A), 84
Line Spacing 1/8 Inch, 8 lpi (ESC 0), 82
Line Spacing 7/72 Inch, 10.3 lpi (ESC 1), 82
Margin Cancel, Bottom (ESC O), 86
Margins, Horizontal (ESC X), 86
Margin, Bottom (ESC N), 86
Overscoring (ESC_), 87
Print All Characters (ESC ), 87
Print Mode (ESC I), 88
Print Next Character (ESC ^), 88
Print Quality (ESC x), 89
Proportional Spacing (ESC P), 89
Set Top-of-Form (ESC 4), 91
Superscript/Subscript Printing Cancel (ESC T),
92
Superscript/Subscript Printing (ESC S), 92
Tab Set/Clear, Horizontal (ESC D), 93
Tab Set/Clear, Vertical (ESC B), 95
Tabs, Clear All (ESC R), 95
Tab, Horizontal (HT), 93
Tab, Vertical (VT), 94
Underline (ESC -), 96
Proprinter III XL emulation
character set control codes, 60
configuring via control codes and menus, 55
control code description format, 58
ESC (Escape) control codes overview, 58
factory settings, 56, 98
graphics control codes overview, 59
ignored and reserved control codes, 60
overview, 55
vertical tabs, 158
Proprinter III XL Features, 16
P-Series
plot data byte format, 149
plot mode, 152
P-Series emulation, 19
configuring via control codes and menus, 19
control code description format, 22