5525B/31/32 Line Matrix Printer LinePrinter Plus Programmer's Reference

Line Spacing n/72 Inch
45
Line Spacing n /72 Inch
ASCII Code SFCC A n
Hex Code SFCC 41 n
Dec Code SFCC 65 n
Purpose Stores a line spacing of n /72-inch increments.
where
n = 1 through 85 (hex 01 through 55). All others are ignored.
Discussion When the SFCC A control sequence is received, all line feed
commands following an SFCC 2 sequence* will be at
n /72-inch
line spacing until a new line spacing is selected or the printer is
reset. The control code line spacing selection will override the
control panel line spacing setting.
*The SFCC 2 sequence (page 42) asserts the line spacing which
was stored by the preceding SFCC A sequence.
Small values of
n may result in overlapping lines. Overlapping
lines may also occur if print attributes such as Elongated
(Double High), Superscript, or Subscript characters are used on
the same line. Printing at different horizontal and vertical
densities will not overlap.
Example The following example illustrates 20/72-inch line spacing.