5525B/31/32 Line Matrix Printer LinePrinter Plus Programmer's Reference

62
Chapter 3 Configuring the Proprinter III XL Emulation with Control Codes
The Control Codes
This index lists each printer command by function, ASCII mnemonic, and the
page where the command is explained in detail. The rest of this chapter
defines the control code functions for Proprinter III XL emulation mode. The
commands are listed in alphabetical order.
FUNCTION ASCII CODE PAGE
Paper Motion
Form Feed FF 76
Line Feed LF 80
Line Feed
n /216 Inch
(One Line Only) ESC J
n 81
Tab, Vertical VT 94
Tab Set/Clear, Vertical ESC B
n1 n2 ... nk NUL 95
Tabs, Clear All ESC R 95
Format
Backspace BS 64
Cancel CAN 70
Carriage Return CR 70
Carriage Return Set ESC 5
n 71
Forms Length Set in Inches ESC C NUL
n 76
Forms Length Set in Lines ESC C
n 77
Margin, Bottom ESC N
n 86
Margin Cancel, Bottom ESC O 86
Margins, Horizontal ESC X
n m 86
Set Top-of-Form ESC 4 91
Tab, Horizontal HT 93
Tab Set/Clear, Horizontal ESC D
n1 n2...nk NUL 93
Tabs, Clear All ESC R 95
Line Spacing
Line Spacing 1/8” (8 lpi) ESC 0 82
Line Spacing 7/72” (10.3 lpi) ESC 1 82
Line Spacing
n /72 Inch
(Executes) ESC 2 83
Line Spacing
n /72 Inch
(Storage) ESC A
n 84
Line Spacing
n /216 Inch ESC 3 n 85
Selection of Alternate Character Set 80-9F
Character Set Select: Set 1 (A) ESC 7 71
Character Set Select: Set 2 (B) ESC 6 71