32 Line Matrix Printer LinePrinter Plus Programmer's Reference

Initialize Parameters

and

Parameter bytes

and

allow you to define several configuration

parameters that will override conflicting factory default and memory-based

configuration values when the printer is reinitialized. Possible values for

and

are listed in Table 18 and Table 19, respectively.

NOTE: In addition to the formatting from bytes

and

, this command sets

the current line as top-of-form. It also clears vertical tabs and sets the

horizontal tabs at every eight columns, starting at column 9.

Table 18.

Values

Bit Function OFF (0) ON (1)

7 Process this byte Process Ignore

6 Reserved Reserved Reserved

5 n/a n/a n/a

4 Line Feed = LF LF + CR

(add CR with each LF)

3 Carriage Return = CR CR + LF

(add LF with each CR)

2 Set forms length 11 inches 12 inches

1 Slashed Zero Disable Enable

0 Character set 1 (A) 2 (B)

Table 19.

Values

Bit Function OFF (0) ON (1)

7 Process this byte Process Ignore

6 Code page 437 850

5 Unidirectional

Printing

Bidirectional Unidirectional

4 12 cpi compressed

to 20

20 12

3 n/a n/a n/a

2 Form feed at TOF Enable Ignore

1 Print Width 13.2 inches 8 inches

0 Sheet feeder n/a n/a