5525B/31/32 Line Matrix Printer LinePrinter Plus Programmer's Reference

Line Spacing n/216 Inch
85
Line Spacing n /216 Inch
ASCII Code ESC 3 n
Hex Code 1B 33 n
Dec Code 27 51 n
Purpose Specifies the line spacing at n /216-inch increments.
where
n = 1 through 255 (hex 01 through hex FF).
Discussion When the
n /216-inch line spacing control code is received, all
line feeds following will be at
n /216-inch line spacing until a new
line spacing is selected or the printer is reset. The control code
line spacing selection will override the control panel line spacing
setting.
The vertical character position moves only in multiples of the
current dot row spacing. If the distance to move is other than a
multiple of the current dot row spacing, the remainder is added
to the next paper motion command.
Caution should be used when combining this control code with
other print attributes such as Elongated (Double High),
Superscript, or Subscript; overlapping lines may occur.
Example The following example illustrates
n /216-inch line spacing.