5525B/31/32 Line Matrix Printer PCL II Programmer's Reference Manual

16
Chapter 2 Configuring the PCL-II Emulation with Control Codes
Table 3 lists the escape sequences you can use with the printer. Note that the
brackets [ ] used in these escape sequences are for clarification purposes
only (the brackets are not actually part of the commands).
Table 3. Line Printer Escape Sequences
Escape Sequence Explanation Page No.
PCL LEVEL I
ESCE Software reset 18
ESCY Display mode on 26
ESCZ Display mode off 26
ESCz Self test 26
ESC*rA Raster graphics start 41
ESC*b[#]W[data] Raster graphics data 41
ESC*rB Raster graphics end 41
ESC&d[DEFGLMNOTUVW\}^] Underline mode on 42
ESC&d[@CHIJKPQRSWXZ[] Underline mode off 42
ESC&11L Perf skip mode on 38
ESC&10L Perf skip mode off 38
ESC&k[0,2]S 10 and 16.67 cpi 26
PCL LEVEL II
ESC[(,)] [#ID] Primary/Secondary font symbol set 19
ESC[(,)]s[
Cpi ]H Primary/Secondary font cpi 22
ESC&1[6,8]D 6/8 lpi 26
ESC&1[1-128]P Page length in lines 37
ESC&1[1-128]F Text length in lines 38
ESC&a[
print position ]L Left margin set 39
ESC&a[
print position ]M Right margin set 39
ESC&p[#]X Transparent mode 39
ESC&a[#]R Move to absolute row position 40
ESC&a[#]C Move to absolute column position 40
ESC&a[+#]R Move to relative row position 40
ESC&a[+/-#]C Move to relative column position 40