5525B/31/32 Line Matrix Printer User's Manual
Table Of Contents
- 1 Introduction
- 2 Setting Up the Printer
- 3 Operating the Printer
- 4 The Configuration Menus
- Configuration Overview
- CONFIG. CONTROL
- ACTIVE EMULATION
- EMULATION
- PCL-II Emulation
- LinePrinter Plus Emulations
- Optional Emulations
- PCL-II Emulation
- LinePrinter Plus Emulation
- P-Series Emulation
- Proprinter XL Emulation
- Epson FX Emulation
- IGP/PGL Submenu
- Features
- Configuring the Emulation with the Control Panel
- Define CR Code (Carriage Return)
- Define LF Code (Line Feed)
- Autowrap
- Select SFCC
- PI Slew Range
- CR Edit
- Select Font
- Select LPI
- Auto Uppercase
- Skip Command Prefix
- Power On IGP/PGL
- Extended Execute Copy
- UPC Descenders
- Compressed CPI
- Ignore Character
- IGP100 Compatbl.
- Optimized Ratio
- IGP/VGL Emulation
- MAINT / MISC
- HOST INTERFACE
- ETHERNET PARAMETERS
- PRINTER CONTROL
- DIAGNOSTICS
- RIBBONMINDER
- 5 Interfaces
- Overview
- Dataproducts Long Line Interface
- IEEE 1284 Parallel Interface
- RS-232 and RS-422 Serial Interfaces
- Host System Configuration
- Internal Ethernet Adapter Configuration
- Configuring the Internal Ethernet Adapter for TCP/IP
- Host Software
- Compiling Host Software
- Computer-aided Configuration with ezsetup or npconfig
- Configuration Through the Network with ARP
- Configuration Through the Network with RARP
- Configuration Through the Network with BOOTP
- Restoring Factory Defaults
- Host Configuration
- Direct Printing Without Spooler
- Printing Via the Spooler
- Custom Interface Scripts
- BSD UNIX
- System V UNIX
- npd Pseudo-device Interface
- Other TCP/IP Methods
- Configuring The Internal Ethernet Adapter For Novell
- Configuring the Internal Ethernet Adapter for Windows
- 6 Troubleshooting
- A Printer Specifications
- B Downloading Firmware
- C ASCII Character Set
- D Communication and Trademark Information
Chapter 4 EMULATION
104
SFCC & Pwrup
This option has several suboptions which define the SFCC and power-
up configuration used with Code V.
Control Character
This option selects the Special Function Control Code (SFCC). The
default value is the caret ^ (decimal 94). Valid values are 17 through
255. Throughout this section, the caret is used as the SFCC. Run a
configuration printout to determine the currently selected SFCC.
Graphics
Options
(from page 103)
Slashes in
Zeros
Ignore Dots Append
Rotated
Truncate Alpha
True Vert 1/10 Absorb After
^PY
UPC
Descenders
Rot. Char Size Ignore Spaces
Midline PY
Enable*
Disable
Disable*
Enable
Disable*
Enable
Enable*
Disable
Disable*
Enable
Absorb All*
Absorb Motion
Disable
Disable*
Enable
Adjusted*
Not Adjusted
Disable*
Enable
Disable*
Enable
Convert to U/C
Absorb After
^PN
Disable*
Enable
Disable*
Enable
IGP 110
Compatbl.
Disable*
Enable