6100 ADCCP Programming Manual

Document History Edition Part Number Product Version Release ID Print Date

First Edition 82411 CP6100 B20 N/A March 1985

Update 1 82227 CP6100 B20 N/A October 1985

Second Edition 069225 CP6100 C30/D10 C30.09/D10.00 January 1993

New editions incorporate any updates issued since the previous edition.

reproduced in any form, including photocopying or translation to another language, without the prior written

consent of Tandem Computers Incorporated. Printed in the United States of America.

Export Statement Export of the information contained in this manual may require authorization from the U. S. Department of

Commerce.

Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

Part 15 of the FCC Rules. The limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates, uses,

and radiates radio frequency energy, and if not installed and used in accordance with the maintenance manual,

may cause harmful interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be required to correct the interference at his/her

own expense. Shielded cable/connector assemblies must be used to meet radiated emission limits.

Examples Examples and sample programs are for illustration only and may not be suited for your particular purpose.

Tandem does not warrant, guarantee, or make any representations regarding the use or the results of the use

of any examples or sample programs in any documentation. You should verify the applicability of any example

or sample program before placing the software into productive use.

Ordering Information If you would like manual ordering information, contact the following:

Domestic U.S. Customers—Call 1-800-243-6886.

International Customers—Contact your local sales representative.

Please Comment If you have questions or problems concerning the content of this document, please use the Reader Comment

Card located in the back of this manual.