6100 BSC Programming Manual

6100 BSC Link and Station Management
-----------------------------------------------------------------
| |
| Request Status Code Description New State |
| |
| WRITEREAD |
| If BSCIDEXCH applies: |
| 0 Normal completion CONTROL |
| 170 Bad ID, no ID CIRCUIT ASS. |
| If BSCIDEXCH does not apply: |
| 0 Normal completion: WRITE if ACK; |
| ACK or text READ if text |
| 162 Timeout WRITE or |
| CONTROL |
| 163 EOT reply to block CONTROL |
| 165 RVI reply to block WRITE |
| 166 ENQ reply to bid CONTROL if |
| primary, READ |
| if secondary |
| 167 EOT reply to bid CONTROL |
| 168 NAK reply to bid CONTROL |
| 169 WACK reply to bid CONTROL |
| 171 No reply to bid CONTROL |
| 172 Format error in CONTROL |
| received data |
| 173 Bad BCC or other CONTROL if |
| error in data sent data received,|
| or received WRITE if data |
| sent |
| 175 Invalid acknowl. WRITE |
| 177 Received block CONTROL |
| too large |
| other DISCONNECTED |
| CONTROL (CONNECT) |
| If BSCIDEXCH applies: |
| 0 Normal completion CIRCUIT ASS. |
| other DISCONNECTED |
| If BSCIDEXCH does not apply: |
| 0 Normal completion CONTROL |
| other DISCONNECTED |
| |
-----------------------------------------------------------------
Figure 2-2. Completion Status to Leave DISCONNECTED State
(Page 2 of 2)
2-6