6100 BSC Programming Manual

6100 BSC Link and Station Management
-----------------------------------------------------------------
| |
| Request Status Code Description New State |
| |
| WRITEREAD 0 Normal completion: WRITE if ACK;|
| ACK or text READ if text |
| 140 Modem error DISCONNECTED |
| 161 6100 error DISCONNECTED |
| 162 Timeout WRITE or |
| CONTROL |
| 164 DLE EOT received DISCONNECTED |
| 165 RVI received WRITE |
| 166 ENQ reply to bid CONTROL if |
| primary, READ|
| if secondary |
| 173 Bad BCC or other CONTROL if |
| error in data in data |
| sent or received received, |
| WRITE if in |
| data sent |
| 175 Invalid acknowl. WRITE |
| 177 Reply or block CONTROL if |
| too long bid, WRITE |
| if block |
| 190 6100 error DISCONNECTED |
| other CONTROL |
| CONTROL 0 Normal completion DISCONNECTED |
| (DISCONNECT) 140 Modem error DISCONNECTED |
| 161 6100 error DISCONNECTED |
| 162 Timeout DISCONNECTED |
| 190 6100 error DISCONNECTED |
| (EOT) 140 Modem error DISCONNECTED |
| 161 6100 error DISCONNECTED |
| 190 6100 error DISCONNECTED |
| (WACK) 140 Modem error DISCONNECTED |
| 161 6100 error DISCONNECTED |
| 190 6100 error DISCONNECTED |
| |
| |
-----------------------------------------------------------------
Figure 2-4. Completion Status to Leave CONTROL State
(Page 2 of 2)
2-13