6100 BSC Programming Manual

6100 BSC Link and Station Management
-----------------------------------------------------------------
| |
| |
| Original State: MULTILEAVING |
| |
| Request Status Code Description New State |
| |
| WRITEREAD 0 Normal completion MULTILEAVING |
| 140 Modem error DISCONNECTED |
| 161 6100 error DISCONNECTED |
| 162 Timeout MULTILEAVING |
| 164 DLE EOT received DISCONNECTED |
| 173 Bad BCC or other MULTILEAVING |
| data error |
| 190 6100 error DISCONNECTED |
| |
| |
-----------------------------------------------------------------
Figure 2-7. Status Codes to Leave Multileaving State
REQUESTS AND FUNCTIONS APPLICABLE TO MULTILEAVING STATE.
The following requests are permitted in multileaving state:
-----------------------------------------------------------------
| |
| |
| FETCH CONFIGURATION, to retrieve line parameters. You can |
| find out the values of line parameters, but you can't |
| change them in this state. This request does not cause |
| a change of state. |
| |
| |
| FETCH STATISTICS, to retrieve line quality and usage data. |
| This request does not cause a change of state. |
| |
| |
| WRITEREAD DATA, to send the next message and receive the |
| next message. The line stays in multileaving state. |
| |
| |
| ABORT, to stop a request in progress, for example, a |
| WRITEREAD request. The line stays in multileaving state. |
| |
| |
-----------------------------------------------------------------
2-23