6100 MPS-B Programming Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series

100

WRITING APPLICATIONS THAT USE 6100 MPS-B

Status Codes and Status Detail Codes

Table 3-1. Status Code Values Returned by 6100 MPS-B

(Continued)

-----------------------------------------------------------------

| |

| Code |

|(Decimal) Description |

| |

| 161 An error occurred within the 6100 subsystem. |

| Note the contents of the status detail field |

| and call your Tandem Representative. If you |

| can reproduce the error while running a Level 2 |

| trace of the line, submit the output from the |

| trace to your Tandem Representative. |

| |

| 162 Request timed out on read or write operation. |

| The line state is not known when this occurs. |

| Send an EOT to reset line. |

| |

| 163 EOT received. Polled station has no data to send. |

| |

| 172 Response incompatible with 6100 MPS-B protocol. |

| |

| 173 Transmission error (maximum number of NAK codes |

| sent or received). The message had an error; for |

| instance, the BCC comparison didn’t work or |

| control characters were embedded in the text. |

| Alternatively, the message was acknowledged with |

| NAK by the other station. In either case, retries |

| were unsuccessful. There could be a line quality |

| problem, or a malfunction in the remote station. |

| The line state is not known when this error |

| occurs. Send an EOT to reset line. |

| |

| 176 Poll sequence ended and no station responded with |

| data. |

| |

| 177 Text overrun. The message received was larger |

| than the Text In value would allow. No data is |

| delivered to the application process. |

| |

| 178 No Poll/Select List specified. |

| |

| 190 An error occurred within the 6100 subsystem. |