6100 MPS-B Programming Manual

WRITING APPLICATIONS THAT USE 6100 MPS-B
Status Codes and Status Detail Codes
Table 3-2. Status Detail Code Values Returned by 6100 MPS-B
(Continued on next page)
-----------------------------------------------------------------
| |
| The following status detail codes are returned for |
| status code 22 (Invalid Parameter): |
| |
| Detail |
| Code |
| (Decimal) Description |
| |
| 0 Everything Okay |
| 1 Invalid Function Value |
| 2 Invalid Modifier Value |
| 3 Invalid Request ID Value |
| 4 Invalid Text Out Value |
| 5 Invalid Text In Value |
| 6 Invalid Text Value |
| 7 Invalid Poll/Select Entry Size Value |
| 8 Invalid Baud Rate Value |
| 9 Attempt to Define or Redefine a Station In Use |
| 10 Attempt to Define an Already Defined Station |
| 11 Attempt to Access an Undefined Station |
| 12 Invalid Station Address Value |
| 13 Invalid Protocol for 6100 MPS-B Module |
| 14 Invalid NonStop task/host synchronization value |
| 15 Invalid write initialization timer |
| |
| |
| The following status detail codes are returned for |
| status code 140 (Modem Error): |
| |
| Detail |
| Code |
| (Decimal) Description |
| |
| 0 Everything Okay |
| 50 Invalid Response |
| 51 Bad LRC |
| 52 Parity Error |
| 53 Error Underrun |
| 54 Buffer Overrun |
| 55 Driver Timeout |
| 56 Framing Error (Asynchronous) |
| 57 Modem Loss |
| 58 DSR Loss |
| 59 CTS Loss |
| 60 DCD Loss (should never occur) |
| |
-----------------------------------------------------------------
3-14