6100 MPS-B Programming Manual

WRITING APPLICATIONS THAT USE 6100 MPS-B
Status Codes and Status Detail Codes
Table 3-2. Status Detail Code Values Returned by 6100 MPS-B
(Continued)
-----------------------------------------------------------------
| |
| Status detail codes for status code 140 (Continued): |
| |
| Detail |
| Code |
| (Decimal) Description |
| |
| 61 Write Timeout--no CTS |
| 62 Write Timeout--other than no CTS |
| 63 DSR Flutter (should never occur) |
| 64 DCD Flutter |
| 65 CTS Flutter (should never occur) |
| 66 Secondary DCD Flutter (should never occur) |
| 67 Write Timeout--DCD did not drop |
| |
| |
| The following status detail codes are returned for |
| status code 160 (Invalid Request for Current Line State): |
| |
| Detail |
| Code |
| (Decimal) Description |
| |
| 0 Everything Okay |
| 70 Line Not Configured |
| 71 Line Not Polled |
| 72 Poll/Select List Not Defined |
| 73 Active I/O--if a READ or WRITE request is pending, |
| CONTROL requests Send EOT, Connect, |
| and Disconnect are rejected. |
| |
-----------------------------------------------------------------
3-15