6530 Programmer's Guide

Block Mode Operation
6530 Programmer’s Guide 3-57
Table 3-6 lists the printer configuration parameters and shows the code and
possible values for each.
*Note: When Code I is used, its value must be the last one in the escape sequence.
Read Terminal Configuration (Esc ?)
The sequence causes the 6530 to transmit the current values for the
terminal configuration parameters to the host. The message returned has
the following general format:
SOH ! code value [ code value ]... terminator
where:
SOH is start of header (01H).
The exclamation point (!) identifies this message as a configuration
message.
Table 3-6. Printer Configuration Parameters
Configuration Item Code Value Meaning
Aux1 Device:
Reserved A-F
Print form feed G 0 trailing
1 beginning
2 none
Print line terminator H 0 CR
1LF
2 CR and LF
Auxl device name I ASCII string*
Aux2 Device:
Reserved A-F
Aux2 device name I ASCII string*