6530 Programmer's Guide

Overview
1-18
6530 Programmer’s Guide
compression
enhance
Turns outbound data compression on or off (for block mode only). (See
“Outbound Compression” on page 3-72.)
cursor type Determines how the cursor appears on the screen: an underscore or a
reverse video block. Set with the Esc v A sequence. For conversational
mode, see “Set Terminal Configuration (Esc v)” on page 2-30. For block
mode, see “Set Terminal Configuration (Esc v)” on page 3-59.
device name Sets the name for the communications driver used. (This value is set by
the user. For more information, see the PC6530 or TS530 user’s guide.)
duplex Selects either half or full duplex communications with the host when
conversational mode is used. Set with the Esc v J sequence. For
conversational mode, see “Set Terminal Configuration (Esc v)” on page
2-30. For block mode, see “Set Terminal Configuration (Esc v)” on page
3-59.
EM3270 support For block mode only, enables/disables support of certain IBM 3270
terminal functions (such as unformatted mode, wraparound fields,
handling of null/spaces, and cursor positioning). See “Set EM3270 Mode
(Esc - m)” on page 3-67.
host name For Multilan connections, sets the name of the host. (This value is set by
the user. For more information, see the PC6530 or TS530 user’s guide.)