6530 Programmer's Guide

Overview
1-20
6530 Programmer’s Guide
language Defines which language character set is used for displaying the graphics
characters. The supported languages are:
ASCII (U.S. English)
Belgian
Cyrillic
Danish
English (UK)
French (AZERTY and QUERTY)
German
Italian (supported in 8-bit versions only)
Norwegian
Portuguese
Spanish
Swedish/Finnish
Swiss-French
Swiss-German
Set with the Esc v F sequence. For conversational mode, see “Set
Terminal Configuration (Esc v)” on page 2-30. For block mode, see “Set
Terminal Configuration (Esc v)” on page 3-59.
local transmit
column
Used for local action (Alt-Enter keys) in conversational mode. It
specifies the beginning column for a line that is to be retransmitted to the
host. For example, the user can use local action to retransmit a long
command string already entered. Only the characters between the column
specified by this parameter and the column preceding the current cursor
position are transmitted. Set with the Esc v U sequence. For
conversational mode, see “Set Terminal Configuration (Esc v)” on page
2-30. For block mode, see “Set Terminal Configuration (Esc v)” on page
3-59.
normal intensity Sets the normal screen intensity for the 6530. It can be set to high
or low. Set with the Esc v T sequence. For conversational mode, see “Set
Terminal Configuration (Esc v)” on page 2-30. For block mode, see “Set
Terminal Configuration (Esc v)” on page 3-59.