6530 Programmer's Guide

Overview
6530 Programmer’s Guide 1-21
packet blocking Specifies the block size used with the X25AM access method when the
workstation or PC is connected to an X.25 communications line. The
setting must match the PAGE6520BLKSIZE modifier set for the X25AM
access method. Values are:
Set with the Esc v L sequence. For conversational mode, see “Set
Terminal Configuration (Esc v)” on page 2-30. For block mode, see “Set
Terminal Configuration (Esc v)” on page 3-59.
parity Sets the type of parity used when the workstation or PC is connected to
the host over an asynchronous line. (The parity setting is ignored on a
Multilan connection.) The setting must match the host system end. The
choices are even, odd, or none. Set with the Esc v I sequence. For
conversational mode, see “Set Terminal Configuration (Esc v)” on page
2-30. For block mode, see “Set Terminal Configuration (Esc v)” on page
3-59.
PFKey support When enabled, the device returns the PF function key sequence plus all
modified fields in a single transmission in response to a read operation by
a Tandem host application. For block mode only. See “PFKey Support”
on page 3-67.
Power On mode Defines the mode when the 6530 is first started. (This value is set by the
user. For more information, see the PC6530 or TS530 user’s guide.)
print form feed Selects when form feeds are issued to the printer (Aux1 device) during
print screen operations. The choices are: after a screen is printed
(trailing), before a screen is printed (beginning), or no automatic form
feed (none). Set by the Esc x T2 sequence. For conversational mode, see
“Set I/O Device Configuration (Esc x)” on page 2-31. For block mode,
see “Set I/0 Device Configuration (Esc x)” on page 3-60.
256 or ON 768
260 or OFF 996
384 1024
512 2048
640