6530 Programmer's Guide

Conversational Mode Operation
6530 Programmer’s Guide 2-29
* Denotes values returned on read; but not supported on write operations.
* When Code I is used, its value must be the last one in the escape sequence.
Switch refresh
rate (TS530
only)
l 0 switch refresh
rate to 71 Hz
1 switch refresh
rate to 82 Hz
Table 2-4. Terminal Configuration Parameters (continued)
Configuration
Parameter Code Value Meaning Value Meaning
Table 2-5. Device Configuration Parameters
Configuration
Parameter Code Value Meaning
Aux1 Device:
Reserved A-F
Print form feed G 0 trailing
1 beginning
2 none
Print line terminator H 0 CR
1LF
2 CR and LF
Aux1 device name I ASCII string*
Aux2 Device:
Reserved A-F
Aux2 device name I ASCII string*