6760 ServerNet/DA Manual

SCF Storage Subsystem Events
6760 ServerNet/DA Manual—424879-003
C-2
SCF Storage Event Messages
SCF Storage Event Messages
Table C-1 lists the storage subsystem event messages and provides a brief description
of each.
Table C-1. Storage Subsystem Event Messages (page 1 of 4)
Event
No.
Event Name
(ZSTO-EVT-) This Event Happens When...
1 ERROR-IN-CONFIG The SCSI Interface Monitor (SIFM) finds incorrect
configuration information for a logical device.
2 INTERNAL-ERROR The SIFM detects a startup or an external request error.
3 DOWNLOAD-
COMPLETE
An extensible I/O process (XIOP) successfully
downloads controller firmware.
4 DOWNLOAD-FAILED An XIOP fails to download controller firmware.
5 CONTROLLER-
ACTION
The SIM fails to perform a requested controller action.
6 INFORMATIONAL The SIM reports an informational message.
1000 ABORT The storage subsystem manager stops access to a disk
device.
1001 ALLOWOPENS The storage subsystem manager executes an
ALLOWOPENS for a disk path.
1002 ALTER The storage subsystem manager alters the attributes of
an existing object.
1003 INITIALIZE The storage subsystem manager initializes a disk to be
used on the system.
1004 LABEL The storage subsystem manager alters the label of a
disk.
1005 PRIMARY The storage subsystem manager swaps the primary
and backup processors for a device or process.
1006 REBUILDDFS The storage subsystem manager rebuilds the
free-space table on a magnetic disk.
1007 REFRESH The storage subsystem manager refreshes a magnetic
disk.
1008 RENAME A user command renames a magnetic disk.
1009 REPLACEBOOT The storage subsystem manager replaces the disk
system-load bootstrap program.
1010 RESET The storage subsystem manager puts an object into a
state from which it can be started.
1011 SPARE The storage subsystem manager assigns an alternate
sector for use in place of a defective sector on a disk.
1012 START The storage subsystem manager successfully places an
object into the STARTED state.