6760 ServerNet/DA Manual

SCF Storage Subsystem Events
6760 ServerNet/DA Manual—424879-003
C-4
SCF Storage Event Messages
1031 CRU-CONFIGURED The storage subsystem manager successfully adds a
customer-replaceable unit (CRU) configuration to the
system configuration database.
1032 CRU-INIT The storage subsystem manager successfully initializes
a CRU.
1033 CRU-INIT-FAILED The storage subsystem manager fails to initialize a
CRU. The event contains the error number returned
from the support function used, provided by either the
SCSI Interface Monitor (SIFM) or the extensible
input/output (XIO) product.
1034 POST-COMPLETE The storage subsystem manager determines that the
power-on-self-test finished successfully for a customer-
replaceable unit (CRU) that was inserted.
1035 POST-FAILED The storage subsystem manager determines that the
power-on-self-test failed for a CRU that was inserted.
1036 CHECKSUM The storage subsystem manager recomputes and
corrected sector checksum values for a range of disk
addresses.
1037 INVALID-CRU The storage subsystem manager does not obtain
enough information to determine what type of CRU was
inserted or how to configure the CRU.
1038 SERVER-ERROR The storage subsystem manager detects a server
access error.
1039 PROCESS-IO-
ERROR
The storage subsystem manager detects a process
startup I/O error.
1040 UNSUPPORTED-
CRU
The storage subsystem manager receives a hardware
insertion event for a CRU it does not support.
1041 CRU-OWNERSHIP The storage subsystem manager detects that it cannot
configure a CRU because the slot where the CRU was
inserted is already configured by another subsystem.
1042 CRU-DELETED The storage subsystem manager deletes a CRU from
the system configuration database.
1043 TASK-ERROR The storage subsystem manager detects that an
internal task failed.
1044 IOP-LAUNCH The storage subsystem manager reports that an
input/output process (IOP) was launched.
1045 CRU-CONFIG-
FAILED
The storage subsystem manager fails to autoconfigure
a CRU. The event contains information describing the
reason for the failure.
1046 CRU-ACCESS-
ERROR
The storage subsystem manager fails to obtain CRU
information.
Table C-1. Storage Subsystem Event Messages (page 3 of 4)
Event
No.
Event Name
(ZSTO-EVT-) This Event Happens When...