6760 ServerNet/DA Manual

6760 ServerNet/DA Manual—424879-003
Index-1
Index
Numbers
1041, storage event 2-14, C-4
5190/5194 tape drive
revision level limitation 1-5
with F-SAC 1-2
with S-SAC 1-3
6760 Adapter Configuration Form
blank forms B-1
filled-out example for disks 2-7
filled-out example for tapes 2-8
6760 ServerNet device adapter
configuration is automatic 2-6
, 3-1
connecting a SCSI cable to 1-9
devices supported 1-1/1-4
faceplate, illustration of 1-7, 2-10
fiber-optic cable coupler 1-14
installation 2-9/2-17
blank configuration forms B-1
key points about 2-18/2-22
limitations 1-4/1-5
overview 2-2/2-8
planning 2-3
procedure 2-11/2-13
LEDs on 2-11
location, displaying with SCF 3-15
maximum of two per enclosure 1-10
moving 2-18
name, displaying with SCF 3-16
removing 2-20
slots for 1-6
illustration of 2-3
systems supported 1-3
testing
with SCF 2-18
with TSM 4-19
viewing configuration
information 3-4
/3-18
6760 ServerNet device adapter (continued)
viewing status information 4-1
/4-17
6761 fiber-optic ServerNet addressable
controller (F-SAC)
See 6761 F-SAC
6761 F-SAC 1-1
See also SAC
connected to 519x tape drive 1-8
installation 1-8
LEDs on 2-11
6762 SCSI ServerNet addressable
controller (S-SAC)
See 6762 S-SAC
6762 S-SAC 1-1
See also SAC
connected to 519x tape drive 1-9
connected to 9490 tape drive 1-9
installation 1-9
SCSI extender for 1-15
9490 tape drive
illustration of 1-4
illustration with S-SAC 1-9
installed by Storage Technology
Company 1-3
support daisy-chaining 1-5
A
Adapter
See 6760 ServerNet device adapter
Adapter cable, fiber-optic 1-14
component list A-1
Adding
6760 adapters 2-3
disk drives 3-2, 4-18
mirrored volumes 3-2
tape drives 3-3, 4-18
AuditTrailBuffer attribute of SCF,
displaying 3-11