6760 ServerNet/DA Manual

6760 ServerNet/DA Manual—424879-003
1
Figures
Figures
Figure 1-1. Two 519x Tape Drives Mounted in a Modular Storage System 112
Figure 1-2.
Two 45xx Disk Modules Mounted in a Modular Storage System 113
Figure 1-3.
The 9490 Tape Subsystem 114
Figure 1-4.
6760 Adapter With Four 6761 F-SACs Installed 117
Figure 1-5.
6761 F-SAC Connected to Two 5190x Drives 118
Figure 1-6.
6762 S-SAC Connected to Two 519x Drives 119
Figure 1-7.
6761 S-SAC Connected to a 9490 Tape Drive 119
Figure 1-8.
Fault-Tolerant Paths to the Same Disk Module 1112
Figure 1-9.
Fault-Tolerant Paths to Two Different Disk Modules 1113
Figure 1-10.
Fiber-Optic Extenders for a Tape Drive 1115
Figure 1-11.
Front Panel on SCSI Extender 1116
Figure 2-1.
Slot Locations for 6760 Adapters 213
Figure 2-2.
Filled-Out 6760 Adapter and Modular Disk Subsystem Configuration
Form 217
Figure 2-3.
Filled-Out 6760 Adapter and Modular Tape Subsystem Configuration
Form 218
Figure 2-4.
LEDs on the Faceplate of 6760 Adapter With Four 6761 F-SACs
2110
Figure 2-5.
Installing a 6760 Adapter 2113
Figure 2-6.
Connecting a Fiber-Optic Cable to a 6761 F-SAC 2115
Figure 2-7.
Cable-Management Hardware 2116
Figure 2-8.
Connecting a SCSI Cable to a 6762 S-SAC 2117
Figure 2-9.
Removing a 6760 Adapter 2122
Figure 3-1.
$DISK02 Two-Adapter, Two-Module Configuration 313
Figure D-1.
$DATA00 in a Four-Controller Configuration D13
Figure D-2.
Configured Cable Paths (How Disk Modules Should Be Cabled) D17
Figure D-3.
Actual Cable Paths (Does Not Match Configuration) D17